Cleaning and Maintenance Solutions for use with
Terracotta, Slate, Stone, Ceramic, Porcelain, Plastic, Quarry Tiles,
Travertine, Marble and Glazed Ceramics

Coverage: 20 sq / m for 45 washes

A gentle floor cleaner containing linseed oil especially developed for terracotta, quarry tiles, slate and stone. Has a fresh, clean fragrance. Ideal for terracotta floors sealed with linseed oil and beeswax. Suitable for both sealed and unsealed floors.

Instructions
Dilute 2 or 3 capfuls (5 capfuls on dirtier floors) of LTP Waxwash in a bucket of warm water. Wash the floor and allow to dry. On waxed floors, finish by buffing.

Coverage
1 litre of LTP Waxwash should be sufficient to wash an average floor of 20 square meters approx 45 times.

Attention
Keep away from children.
LTP Waxwash should not be used on acrylic sealed floors.
 

Coverage
1 litre of Floorshine should be sufficient to wash an average floor of 20 sq / m approximately 40 times, depending on the concentration used.

Instructions
Use LTP Floorshine regularly to maintain protection as your floor becomes dirty. Dilute 2 or 3 capfuls of LTP Floorshine per litre of warm water. Wash the floor using this solution and regularly clean out mop in a separate bucket of clean water. Allow floor to dry without rinsing. After some months, if the floor suffers from acrylic build up or becomes difficult to clean, remove the accumulation using LTP Grimex and reseal with LTP Ironwax.

Coverage
1 litre of Floorshine should be sufficient to wash an average floor of 20 sq / m approximately 40 times, depending on the concentration used.

Attention
Keep out of reach of children Store in a frost proof place.
 

This information is offered without guarantee. The material should be used so as to take account of the local conditions and the surfaces to be treated. In case of doubt, the product should be tried out in an inconspicuous area
 

Home - Cleaning - Maintenance - Application - Product Selector - Links - Purchase Online